| |
|
 |
| Walther Praezision 低壓系列產品 |
Series LP / SP
Series LP / SP
Nominal bore:
2.5, 3, 4, 6, 7, 9, 12, 19, 32 and 50 mm
Working pressure:
up to 10 MPa (single types up to 20 MPa) dependent on nominal bore and material; in part also suitable for vacuum
Media:
water, compressed air, diverse fluids, fuel, lubricating greases / oils, technical gases
Materials:
steel and brass with different surface coatings, stainless steel 1.4404 / 1.4571 or similar
Special features:
Squirt-free, many types of connections, locking aid, ring grips for larger nominal bores |
|
|
Series KL
Nominal bore:
6, 12 and 30 mm
Working pressure:
up to 1.2 MPa (dependent on nominal bore and material)
Media:
water, compressed air, diverse fluids, fuel, lubricating greases / oils, technical gases
Materials:
polyamide (PA), polyvinylidenfluoride (PVDF), polypropylene (PP), polyacetal resin (POM) or similar |
|
|
Series UF
Series UF
Nominal bore:
6, 7, 12, 19 and 32 mm
Working pressure:
up to 4 MPa (dependent on nominal bore and material)
Media:
water, compressed air, diverse fluids, fuel, lubricating greases / oils, technical gases, etc.
|
|
Materials:
steel and brass with different surface coatings; stainless steel 1.4404 / 1.4571 or similar
Special Features::
Due to the different shape of the guiding parts (triangular, square, round) of coupling and adaptor only coupling halves with equivalent shapes can be connected. |
|
Series BF
Series BF
Nominal bore:
5, 9 and 12 mm
Working pressure:
up to 0.4 MPa (dependent on nominal bore and material)
Media:
water, steam, solvents, acids, bases, oils, all non-lubricating media, etc.
Materials:
stainless steel 1.4404/1.4571 or similar
Special features:
Clean break coupling with easily cleanable smooth ball-face outer contour;
can also be connected under high pressures, squirt-free, high flow rate, automatic lock
|
|
|
Series LS
Series LS
Nominal bore: Working pressure:
6, 9 and 11 mm up to1.2 MPa
Media: Materials:
compressed air coupling housing: steel durnicoated
locking sleeve: brass passivated
|
|
Special features :
Compressed air safety coupling with automatic lock and very high flow rates; a special design avoids the dangerous whip effect completely.
The safety coupling is "DEKRA type-tested".
Fits onto different nipple contours.
see also Series LS in large nominal sizes(12, 23 and 38 mm) |
|
Series LS large nominal sizes
Series LS large nominal sizes
Nominal bore: Working pressure:
12, 23 and 38 mm up to1.6 MPa
Media:
compressed air
Materials:
coupling housing: brass nickel plated, locking sleeve: aluminium hardcoated
Special features:
compressed air safety coupling for high flow rates
(free pass when valve is opened)
Unlocking only possible with low residual pressure (this avoids the dangerous whip effect completely).
|
|
|
| |
Series LT
Series LT
Nominal bore : Working pressure:
6, 9 and 11 mm up to1.2 MPa
Media:
compressed air
Materials:
coupling housing: aluminium hardcoated
locking sleeve: impact resistant plastics
Special features:
Compressed air coupling in very light design for use on the tool side, very high flow rate, fits onto different nipple profiles
|
 |
